Cell Culture Flasks
Alkali Scientific Spinner Flask Flat Bottom, 100mL
Flat bottom spinner flasks promote optimal growth of suspension cultures. The complete system includes a flask with two angled sidearms and a PTFE paddle with glass shaft that adjusts through the compression fitting in the cap. Flat bottom vessel 100mL, 250mL, 500mL and 1L. Heavy wall center port and side arms. FDA approved materials. Capacity (mL) Center Neck Sidearm OD x OAH (mm) 100 70 GL 32 70 x 175 250 70 GL 32 85 x 210 500 70 GL 45 110 x 250 1000 100 GL 45 135 x 305 3000 100 GL 45 165 x 355 Spinner flasks are constructed of high quality components with the following specifications: Vessels: Borosilicate type 1 glass Shafts: Borosilicate glass 7mm Magnets: PTFE encapsulated Paddle: PTFE Cap: Polypropylene Compression fitting: Polypropylene Liner: Silicone O ring: Silicone
Chemglass Life Sciences Spinner Flask, 1000mL, Flat Bottom, Replacement Glass Flask ONLY
Replacement vessel is supplied with black phenolic, rubber lined caps for the 18mm side arms, polypropylene caps and pouring rings for the GL-32 and GL-45 side arms.
Chemglass Life Sciences Flask, Shake, 1000mL, Baffled, Plain Top, Approx OD x Height (mm): 130 x 215
Flask, Shake, 1000mL, Baffled, Plain Top, Approx OD x Height (mm): 130 x 215. Baffle indents on the lower outside edge of the flask to help oxygen transfer to the culture medium when used on an orbital shaker.
Chemglass Life Sciences Spinner Flask Only, 1000mL, Jacketed, BioProcess, Plain Bottom
Water jacketed, flat bottomed spinner flasks consist of a water jacketed spinner flask, manufactured from Type 1 Class A borosilicate glass.Flasks are typically used with a circulating water bath.Jacket volumes are approximate and flasks are not graduated.Note: Paddle and Cap assembly are not included.
Bellco Glass, Inc. Large Flange Z/Z Paddle, 36L
Manufactured from 316l stainless steel with electropolish finish. Ra 32 finish or better inside and out. Ideal use for cell culture and reduces shear in delicate cell culture. MADE IN THE USA. Blade dimension: 5 3/4 x 2 1/2" Shaft oal: 16 3/4"
Chemglass Life Sciences Internal Stirring Assembly for 500mL BioProcess Spinner Flasks
Internal Stirring Assembly for 100mL BioProcess Spinner.Flasks
Bellco Glass, Inc. MicroCarrier Flask Only,500mL,100mm Nk W/Dimple Bottom
Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. MADE IN THE USA. SIZE: 500ml (working volume). Dimensions: 110mm OD x 170mm overall height. Center neck: 100mm. Two 45mm angled sidearms; (ANGLED 60°). Grad. Range: 100-500ml, every 50ml. Supply with (2) 45mm PP blue screw caps & pouring rings.
Chemglass Life Sciences BioProcess Spinner Flask, 250mL, Flat Bottom, Complete
Flat bottom spinner flasks promote optimal growth of suspension cultures.The complete system includes a flask with two angled sidearms and a PTFE paddle with glass shaft that adjusts through the compression fitting in the cap.
Chemglass Life Sciences 100mL Internal Large Impeller Spinner Flask, Bioprocess, Complete
MicroCarrier spinner flasks with larger paddle design promotes increased optimal growth of suspension and microcarrier cultures.Indented bottom (100mL thru 1000mL) promotes mixing action under the impeller paddle.The 3L version does not have a dimple.The complete system includes a flask with two angled sidearms and a PTFE paddle assembly that attaches underneath the cap decreasing the risk of contamination.
Chemglass Life Sciences 500mL Internal Large Impeller Spinner Flask, Bioprocess, Complete
MicroCarrier spinner flasks with larger paddle design promotes increased optimal growth of suspension and microcarrier cultures.Indented bottom (100mL thru 1000mL) promotes mixing action under the impeller paddle.The 3L version does not have a dimple.The complete system includes a flask with two angled sidearms and a PTFE paddle assembly that attaches underneath the cap decreasing the risk of contamination.
Bellco Glass, Inc. Bell-Flo Complete, 250mL
Manufactured from type 1 class a Borosilicate glass. Bottom indent and 3 vertical baffles for optimal mixing. MADE IN THE USA. Sidearm cap: 32mm Center cap: 70mm Dimensions: 150" x 85" Flask size: 250ml
Chemglass Life Sciences Spinner Flask Only, 250mL, Jacketed, BioProcess, Plain Bottom
Water jacketed, flat bottomed spinner flasks consist of a water jacketed spinner flask, manufactured from Type 1 Class A borosilicate glass.Flasks are typically used with a circulating water bath.Jacket volumes are approximate and flasks are not graduated.Note: Paddle and Cap assembly are not included.
Bellco Glass, Inc. Adjustable spinner height. Ptfe impeller assembly rides on glass bearings for friction free operation. 25ml & 50ml have black phenolic rubber lined caps. 100ml-300ml have polypropylene caps, silicone gasket and pouring rings. Black phenolic rubber-lin
Adjustable spinner height. Ptfe impeller assembly rides on glass bearings for friction free operation. 25ml & 50ml have black phenolic rubber lined caps. 100ml-300ml have polypropylene caps, silicone gasket and pouring rings. Black phenolic rubber-lin
Chemglass Life Sciences Spinner Flask, 250mL, Adjustable Hanging Bar, Complete
Adjustable hanging bar spinner flasks are designed for growth of suspension cultures.The system includes a flat bottom flask with two angled sidearms and a stir bar with glass shaft that adjusts through the compression fitting in the cap.
Bellco Glass, Inc. MicroCarrier Spinner Flask Only, 8L No Ctr Cap
Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. MADE IN THE USA. Size: 8l Sidearm cap: 45mm (included) •100mm ctr neck•(2) 45mm angled sidearms (30°)•dimensions: 238mm od x 420mm overall height•graduations: 1500ml to 8000ml - every 500ml•supply with two (2) 45mm pp blue s/caps & pouring rings•supply with no center cap (for center solid cap; A523-146)•material: type 1 class a borosilicate glass•weight of flask (empty): 8lbs (approx)